beamUp - MAXIMUM OPENINGS IN REINFORCED CONCRETE

Do you know that problem?

There are beams in the way  from the technical center to the ascending rope. The statics can only tolerate small holes in the beam, too small to pass all the pipes, cable routes, and ventilation ducts. These then have to be laid around it, in an expensive and time-consuming way.

 

No more of this!

beamUp creates openings that are just as high and wide as you need them to be in order to guide all cables and ducts collision-free and on the shortest path between them. beamUp is a steel element that replaces the reinforced concrete beam in the critical area.

ADVANTAGES

  • Reduces floor height
  • Saves material and costs
  • Enables easy subsequent installation and retrofitting during the life cycle of buildings
  • Simplifies cable routing
  • 100% recyclable

TECHNICAL INFORMATION

  • Opening

    The position, number, and size of the openings are freely selectable. The height and width of the openings correspond to the geometry of the reinforced concrete beam.

  • Ceiling

    beamUp is compatible with in-situ concrete ceilings, prestressed concrete hollow ceilings, and semi-finished ceilings.

  • Reinforced concrete beam

    beamUp fits into any normal-sized reinforced concrete beam.

  • Tension belt

    The tension belt of the beamUp is fire-protected by coating.

  • Stiffeners

    The stiffeners connect the tension belt to the flat ceiling profile and are fire-protected by coating.

  • Connector

    The connector is the connecting element of the beamUp to the concrete cross-section.

  • Connection reinforcement

    Welded-on reinforcement bars ensure power transmission.

  • Column

    beamUp enables the use of any support and column construction.

  • Flat ceiling profile

    The flat ceiling profile forms the ceiling support, is at the same time the beamUp's compression belt and the local bending beam above the opening area.

DESIGN PROCESS

  • CONFIGURATORYou define the beam dimensions, the desired openings and loads.
  • ORDERYou place an order with us.
  • DESIGN RELEASEYou check the design and release it for production.
  • PRODUCT ACCEPTANCEYou will receive the beamUp "free construction site".
1
2
3
4
5
6
7
  • OFFERYou will receive an offer from us.
  • DESIGNYou will receive statics and workshop drawings for your beamUp.
  • PRODUCTIONThe beamUp is being produced.
  • 1
    CONFIGURATOR
    You define the beam dimensions, the desired openings and loads.
  • 2
    OFFER
    You will receive an offer from us.
  • 3
    ORDER
    You place an order with us.
  • 4
    DESIGN
    You will receive statics and workshop drawings for your beamUp.
  • 5
    DESIGN RELEASE
    You check the design and release it for production.
  • 6
    PRODUCTION
    The beamUp is being produced.
  • 7
    PRODUCT ACCEPTANCE
    You will receive the beamUp "free construction site".

ON SITE

beamUp is delivered to the construction site “just-in-time”. After installing the supplied screw reinforcement, the on-site beam reinforcement is added. Then the beamUp with the reinforcement cage is lifted into the pre-equipped formwork. As usual, the ceiling is shuttered, reinforced and concreted.

CONFIGURATOR

You can configure your beamUp in no time.

Schurzelter Straße 25
52074, Aachen, Germany

 

+49 241 92883 22

 

info@95construction.com