CONFIGURATOR beamUp

The configurator allows the pre-dimensioning of many practical applications of the beamUp. If your carrier cannot be measured with the configurator, we will be happy to help you.

The beamUp can generally be installed in a reinforced concrete beam that has been designed and dimensioned according to the rules of construction.

You need the statics of the bar to use the configurator. When using the configurator, the internal forces (M and V) must be entered at the gate to the beamUp.

The tool measures the beamUp and verifies the connection of the beamUp to the concrete cross-section.

The beamUp is verified independently of the static system of the beam (multi-field or single-field beam; type of support).

INPUT VALUES beamUp

BASIC INFORMATION

Hinweis
Country of construction project
Notice
Country of construction project
Notice
PLZ of construction project
Notice
PLZ of construction project
Notice
Location of construction project
Notice
Location of construction project
Notice
Helps with allocation when entering multiple beams
Notice
Helps with allocation when entering multiple beams

CEILING

Notice
beamUp is compatible with in-situ concrete ceilings, prestressed concrete hollow ceilings and semi-finished ceilings
Notice
beamUp is compatible with in-situ concrete ceilings, prestressed concrete hollow ceilings and semi-finished ceilings
Notice
Ceiling height (see figure)
(cm)
Notice
Ceiling height (see figure)

CONCRETE BARS

Notice
Compressive strength class of concrete
Notice
Compressive strength class of concrete
Notice
XC1: class for dry or permanently wet environment; XC2: class for wet or rarely dry environment; XC3: moderate humidity
Notice
XC1: class for dry or permanently wet environment; XC2: class for wet or rarely dry environment; XC3: moderate humidity
Notice
Fire resistance class of the building
Notice
Fire resistance class of the building
Notice
Width of the reinforced concrete girder (see illustration)
(cm)
Notice
Width of the reinforced concrete girder (see illustration)
Notice
Total height
(cm)
Notice
Total height

OPENINGS

Hinweis
Gross length of the total openings
(m)
Notice
Gross length of the total openings
Notice
The number of openings is limited to 5
Notice
The number of openings is limited to 5

EXPOSURES

Forces and internal forces must be entered with the correct sign!

Notice
Rated load including partial safety factors on beamUp (including dead weight of the ceiling)
(kN/m)
Notice
Rated load including partial safety factors on beamUp (including dead weight of the ceiling)
Notice
Design moment at the gate to the beamUp (in section I-I see figure)
(kNm)
Notice
Design moment at the gate to the beamUp (in section I-I see figure)
Notice
Design shear force at the gate to the beamUp (in section I-I see figure)
(kN)
Notice
Design shear force at the gate to the beamUp (in section I-I see figure)
Notice
Maximum design shear force over the entire length of the reinforced concrete girder
(kN)
Notice
Maximum design shear force over the entire length of the reinforced concrete girder

OUTPUT VALUES beamUp

  • ID:
  • Weight:
    (kg)
  • Coating surface:
    (m²)
  • Utilization rate:
    %
Inquiry

Hinweise

  • The beamUp is verified according to the Eurocode.
  • The beamUp is verified on the condition that the reinforced concrete beam has already been verified according to the rules of construction.
  • The configurator considers the verifications in the ultimate limit state. For compliance with the deformation in the serviceability limit state, it is assumed that the deformation limits of the pure reinforced concrete beam are adhered to.

Schurzelter Straße 25
52074, Aachen, Germany

 

+49 241 92883 22

 

info@95construction.com