DRAHEIM TRÄGER - LEANER LIGHTER BETTER

Do you know that problem?

Columns interfere. The ceiling spans are larger than 10m. The loads are high and the available construction height is low. The deformation cannot be controlled. And to make matters worse, ventilation ducts must also be run through the load-bearing structure. Conventional suspension systems quickly reach their limits.

Here is the solution!

The DRAHEIM TRÄGER is the system for column-free construction. It enables large spans with low overall height and maximum openings for pipes and ducts. In addition, it has no time-dependent deformation behavior and does not need armoring or auxiliary support.

ADVANTAGES

Construction and installation are on one level. This reduces the floor height.
The use of prefabricated beams and the simple assembly shorten the construction time.
With “just-in-time” delivery, the assembly can take place directly from the truck. No storage space is required.
There is no time-dependent deformation behavior.
Large spans reduce the number of columns and increase the usable area.
Small heights increase the clear floor heights or the number of floors for given building height.
The building can be easily adapted to different requirements during the life cycle.

TECHNICAL INFORMATION

Opening

Three generous openings are available for cable feed-through.
Ceiling

The DRAHEIM TRÄGER is compatible with in-situ concrete ceilings, prestressed hollow-core concrete ceilings and semi-precast ceilings.
Shear area

The shear area connects the upper and lower chord.
Tension belt

The curved tension belt enables the highest possible load capacity with a reduced material requirement.
Stiffners

The stiffeners connect the tension belt to the upper belt.,
Upper chord

The upper chord of the DRAHEIM TRÄGER lies within the ceiling level.

Opening

Three generous openings are available for cable feed-through.

Ceiling

The DRAHEIM TRÄGER is compatible with in-situ concrete ceilings, prestressed hollow-core concrete ceilings and semi-precast ceilings.

Shear area

The shear area connects the upper and lower chord.

Tension belt

The curved tension belt enables the highest possible load capacity with a reduced material requirement.

Stiffners

The stiffeners connect the tension belt to the upper belt.,

Upper chord

The upper chord of the DRAHEIM TRÄGER lies within the ceiling level.

DESIGN PROCESS

CONFIGURATORYou define the beam dimensions, the desired openings and loads.
ORDERYou place an order with us.
DESIGN RELEASEYou check the design and release it for production.
PRODUCT ACCEPTANCEYou will receive the DRAHEIM TRÄGER "free construction site".

OFFERYou will receive an offer from us.
DESIGNYou will receive statics and workshop drawings for your DRAHEIM TRÄGER.
PRODUCTIONThe DRAHEIM TRÄGER is being produced.

1

CONFIGURATOR

You define the beam dimensions, the desired openings and loads.
2

OFFER

You will receive an offer from us.
3

ORDER

You place an order with us.
4

DESIGN

You will receive statics and workshop drawings for your DRAHEIM TRÄGER.
5

DESIGN RELEASE

You check the design and release it for production.
6

PRODUCTION

The DRAHEIM TRÄGER is being produced.
7

PRODUCT ACCEPTANCE

You will receive the DRAHEIM TRÄGER "free construction site".

ON SITE

Standard installation

DRAHEIM TRÄGER are placed on prefabricated supports. Installation is simple and does not require any special steel construction knowledge. Beams can usually be moved with a construction site crane.

Alternatively

Attachment to steel components with screw connections, which are carried out by steel construction engineers. The steel components can be manufactured and delivered on request. The beams can be installed without auxiliary supports. Ceiling elements are laid according to the instructions.

CONFIGURATOR

You can configure your DRAHEIM TRÄGER in no time.

configure